Struct IntroduceAckStatus Copy item path

impl IntroduceAckStatus

pub const SUCCESS: IntroduceAckStatus

The message was relayed successfully.

pub const NOT_RECOGNIZED: IntroduceAckStatus

The introduction point does not have a live circuit from the identified service.

pub const BAD_MESSAGE_FORMAT: IntroduceAckStatus

There was a failure while parsing the INTRODUCE1 message.

pub const CANT_RELAY: IntroduceAckStatus

The introduction point was unable to deliver the message to the service.

pub fn is_recognized(self) -> bool

Return true if this value is one that we recognize.

pub fn from_name(name: &str) -> Option<Self>

Try to convert this value from one of the recognized names.

Trait Implementations§

impl Clone for IntroduceAckStatus

fn clone(&self) -> IntroduceAckStatus

Returns a copy of the value. Read more

1.0.0 · Source§

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source. Read more

impl Debug for IntroduceAckStatus

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter. Read more

impl Display for IntroduceAckStatus

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter. Read more

impl From<IntroduceAckStatus> for u16

fn from(val: IntroduceAckStatus) -> u16

Converts to this type from the input type.

impl From<u16> for IntroduceAckStatus

fn from(num: u16) -> IntroduceAckStatus

Converts to this type from the input type.

impl HasMemoryCostStructural for IntroduceAckStatus

fn indirect_memory_cost(&self, et: EnabledToken) -> usize

Memory cost of data stored out-of-line Read more

impl HasRetryTime for IntroduceAckStatus

When to maybe retry introduction to the same service at the same introduction point.

(Using this on IntroduceAckStatus::SUCCESS is a mistake; if you do that you’ll not get a meaningful retry time, but it won’t panic.)

fn retry_time(&self) -> RetryTime

Return the time when the operation that gave this error can be retried. Read more

fn abs_retry_time<F>(&self, now: Instant, choose_delay: F) -> AbsRetryTime
where F: FnOnce() -> Duration, Self: Sized,

Return an absolute retry when the operation that gave this error can be retried. Read more

impl PartialEq for IntroduceAckStatus

fn eq(&self, other: &IntroduceAckStatus) -> bool

Tests for self and other values to be equal, and is used by ==.

1.0.0 · Source§

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl Copy for IntroduceAckStatus

impl Eq for IntroduceAckStatus

impl StructuralPartialEq for IntroduceAckStatus

Auto Trait Implementations§

impl UnwindSafe for IntroduceAckStatus

Blanket Implementations§

impl<T> Any for T
where T: 'static + ?Sized,

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more

impl<'a, T, E> AsTaggedExplicit<'a, E> for T
where T: 'a,

fn explicit(self, class: Class, tag: u32) -> TaggedParser<'a, Explicit, Self, E>

impl<'a, T, E> AsTaggedImplicit<'a, E> for T
where T: 'a,

fn implicit( self, class: Class, constructed: bool, tag: u32, ) -> TaggedParser<'a, Implicit, Self, E>

impl<T> Borrow<T> for T
where T: ?Sized,

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more

impl<T> BorrowMut<T> for T
where T: ?Sized,

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more

impl<T> CloneToUninit for T
where T: Clone,

unsafe fn clone_to_uninit(&self, dest: *mut u8)

🔬This is a nightly-only experimental API. (clone_to_uninit)

Performs copy-assignment from self to dest. Read more

impl<T> Downcast for T
where T: Any,

fn into_any(self: Box<T>) -> Box<dyn Any>

Converts Box<dyn Trait> (where Trait: Downcast) to Box<dyn Any>, which can then be downcast into Box<dyn ConcreteType> where ConcreteType implements Trait.

fn into_any_rc(self: Rc<T>) -> Rc<dyn Any>

Converts Rc<Trait> (where Trait: Downcast) to Rc<Any>, which can then be further downcast into Rc<ConcreteType> where ConcreteType implements Trait.

fn as_any(&self) -> &(dyn Any + 'static)

Converts &Trait (where Trait: Downcast) to &Any. This is needed since Rust cannot generate &Any’s vtable from &Trait’s.

fn as_any_mut(&mut self) -> &mut (dyn Any + 'static)

Converts &mut Trait (where Trait: Downcast) to &Any. This is needed since Rust cannot generate &mut Any’s vtable from &mut Trait’s.

impl<T> DowncastSend for T
where T: Any + Send,

fn into_any_send(self: Box<T>) -> Box<dyn Any + Send>

Converts Box<Trait> (where Trait: DowncastSend) to Box<dyn Any + Send>, which can then be downcast into Box<ConcreteType> where ConcreteType implements Trait.

impl<T> DowncastSync for T
where T: Any + Send + Sync,

fn into_any_sync(self: Box<T>) -> Box<dyn Any + Sync + Send>

Converts Box<Trait> (where Trait: DowncastSync) to Box<dyn Any + Send + Sync>, which can then be downcast into Box<ConcreteType> where ConcreteType implements Trait.

fn into_any_arc(self: Arc<T>) -> Arc<dyn Any + Sync + Send>

Converts Arc<Trait> (where Trait: DowncastSync) to Arc<Any>, which can then be downcast into Arc<ConcreteType> where ConcreteType implements Trait.

impl<T> DynClone for T
where T: Clone,

fn __clone_box(&self, _: Private) -> *mut ()

impl<Q, K> Equivalent<K> for Q
where Q: Eq + ?Sized, K: Borrow<Q> + ?Sized,

fn equivalent(&self, key: &K) -> bool

Checks if this value is equivalent to the given key. Read more

impl<Q, K> Equivalent<K> for Q
where Q: Eq + ?Sized, K: Borrow<Q> + ?Sized,

fn equivalent(&self, key: &K) -> bool

Compare self to key and return true if they are equal.

impl<T> From<T> for T

fn from(t: T) -> T

Returns the argument unchanged.

impl<T> HasMemoryCost for T
where T: HasMemoryCostStructural,

fn memory_cost(&self, et: EnabledToken) -> usize

Returns the memory cost of self, in bytes Read more

impl<T> HasTypedMemoryCost<T> for T
where T: HasMemoryCost,

fn typed_memory_cost(&self, enabled: EnabledToken) -> TypedMemoryCost<T>

The cost, as a TypedMemoryCost<T> rather than a raw usize

impl<T> Instrument for T

fn instrument(self, span: Span) -> Instrumented<Self>

Instruments this type with the provided [Span], returning an Instrumented wrapper. Read more

fn in_current_span(self) -> Instrumented<Self>

Instruments this type with the current Span, returning an Instrumented wrapper. Read more

impl<T, U> Into for T
where U: From<T>,

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

impl<T> IntoEither for T

fn into_either(self, into_left: bool) -> Either<Self, Self>

Converts self into a Left variant of Either<Self, Self> if into_left is true. Converts self into a Right variant of Either<Self, Self> otherwise. Read more

fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
where F: FnOnce(&Self) -> bool,

Converts self into a Left variant of Either<Self, Self> if into_left(&self) returns true. Converts self into a Right variant of Either<Self, Self> otherwise. Read more

impl<T> Same for T

type Output = T

Should always be Self

impl<T> ToOwned for T
where T: Clone,

type Owned = T

The resulting type after obtaining ownership.

fn to_owned(&self) -> T

Creates owned data from borrowed data, usually by cloning. Read more

fn clone_into(&self, target: &mut T)

Uses borrowed data to replace owned data, usually by cloning. Read more

impl<T> ToString for T
where T: Display + ?Sized,

fn to_string(&self) -> String

Converts the given value to a String. Read more

impl<T, U> TryFrom for T
where U: Into<T>,

type Error = Infallible

The type returned in the event of a conversion error.

fn try_from(value: U) -> Result<T, <T as TryFrom>::Error>

Performs the conversion.

impl<T, U> TryInto for T
where U: TryFrom<T>,

type Error = >::Error

The type returned in the event of a conversion error.

fn try_into(self) -> Result<U, >::Error>

Performs the conversion.

impl<V, T> VZip<V> for T
where V: MultiLane<T>,

fn vzip(self) -> V

impl<T> WithSubscriber for T

fn with_subscriber<S>(self, subscriber: S) -> WithDispatch<Self>
where S: Into<Dispatch>,

Attaches the provided Subscriber to this type, returning a [WithDispatch] wrapper. Read more

fn with_current_subscriber(self) -> WithDispatch<Self>

Attaches the current default Subscriber to this type, returning a [WithDispatch] wrapper. Read more

impl<T> ErasedDestructor for T
where T: 'static,