Struct TorClientConfigBuilder Copy item path

impl TorClientConfigBuilder

pub fn tor_network(&mut self) -> &mut NetworkConfigBuilder

Information about the Tor network we want to connect to.

pub fn storage(&mut self) -> &mut StorageConfigBuilder

Directories for storing information on disk

pub fn download_schedule(&mut self) -> &mut DownloadScheduleConfigBuilder

Information about when and how often to download directory information

pub fn directory_tolerance(&mut self) -> &mut DirToleranceBuilder

Information about how premature or expired our directories are allowed to be.

These options help us tolerate clock skew, and help survive the case where the directory authorities are unable to reach consensus for a while.

pub fn override_net_params(&mut self) -> &mut HashMap<String, i32>

Facility to override network parameters from the values set in the consensus.

pub fn bridges(&mut self) -> &mut BridgesConfigBuilder

Information about bridges, pluggable transports, and so on

pub fn channel(&mut self) -> &mut ChannelConfigBuilder

Information about how to build paths through the network.

pub fn system(&mut self) -> &mut SystemConfigBuilder

Configuration for system resources used by Arti

Note that there are other settings in this section, in arti::cfg::SystemConfig - these two structs overlay here.

pub fn path_rules(&mut self) -> &mut PathConfigBuilder

Information about how to build paths through the network.

pub fn preemptive_circuits(&mut self) -> &mut PreemptiveCircuitConfigBuilder

Information about preemptive circuits.

pub fn circuit_timing(&mut self) -> &mut CircuitTimingBuilder

Information about how to retry and expire circuits and request for circuits.

pub fn address_filter(&mut self) -> &mut ClientAddrConfigBuilder

Rules about which addresses the client is willing to connect to.

pub fn stream_timeouts(&mut self) -> &mut StreamTimeoutConfigBuilder

Information about timing out client requests.

pub fn vanguards(&mut self) -> &mut VanguardConfigBuilder

Information about vanguards.

pub fn use_obsolete_software( &mut self, ) -> &mut SoftwareStatusOverrideConfigBuilder

Support for running with known-obsolete versions.

pub fn build(&self) -> Result<TorClientConfig, ConfigBuildError>

Builds a new TorClientConfig.

§Errors

If a required field has not been initialized.

impl TorClientConfigBuilder

pub fn from_directories<P, Q>(state_dir: P, cache_dir: Q) -> Self
where P: AsRef<Path>, Q: AsRef<Path>,

Returns a TorClientConfigBuilder using the specified state and cache directories.

All other configuration options are set to their defaults, except storage.keystore.path, which is derived from the specified state directory.

Trait Implementations§

impl Builder for TorClientConfigBuilder

type Built = TorClientConfig

The type that this builder constructs

fn build(&self) -> Result<TorClientConfig, ConfigBuildError>

Build into a Built Read more

impl Clone for TorClientConfigBuilder

fn clone(&self) -> TorClientConfigBuilder

Returns a copy of the value. Read more

1.0.0 · Source§

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source. Read more

impl Debug for TorClientConfigBuilder

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter. Read more

impl Default for TorClientConfigBuilder

fn default() -> Self

Returns the “default value” for a type. Read more

impl<'de> Deserialize<'de> for TorClientConfigBuilder

fn deserialize<D>(deserializer: D) -> Result<Self, D::Error>
where __D: Deserializer<'de>,

Deserialize this value from the given Serde deserializer. Read more

impl Serialize for TorClientConfigBuilder

fn serialize<S>(&self, serializer: S) -> Result<S::Ok, S::Error>
where S: Serializer,

Serialize this value into the given Serde serializer. Read more

Auto Trait Implementations§

impl UnwindSafe for TorClientConfigBuilder

Blanket Implementations§

impl<T> Any for T
where T: 'static + ?Sized,

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more

impl<'a, T, E> AsTaggedExplicit<'a, E> for T
where T: 'a,

fn explicit(self, class: Class, tag: u32) -> TaggedParser<'a, Explicit, Self, E>

impl<'a, T, E> AsTaggedImplicit<'a, E> for T
where T: 'a,

fn implicit( self, class: Class, constructed: bool, tag: u32, ) -> TaggedParser<'a, Implicit, Self, E>

impl<T> Borrow<T> for T
where T: ?Sized,

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more

impl<T> BorrowMut<T> for T
where T: ?Sized,

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more

impl<T> CloneToUninit for T
where T: Clone,

unsafe fn clone_to_uninit(&self, dest: *mut u8)

🔬This is a nightly-only experimental API. (clone_to_uninit)

Performs copy-assignment from self to dest. Read more

impl<T> Conv for T

fn conv<T>(self) -> T
where Self: Into<T>,

Converts self into T using Into<T>. Read more

impl<T> Downcast for T
where T: Any,

fn into_any(self: Box<T>) -> Box<dyn Any>

Converts Box<dyn Trait> (where Trait: Downcast) to Box<dyn Any>, which can then be downcast into Box<dyn ConcreteType> where ConcreteType implements Trait.

fn into_any_rc(self: Rc<T>) -> Rc<dyn Any>

Converts Rc<Trait> (where Trait: Downcast) to Rc<Any>, which can then be further downcast into Rc<ConcreteType> where ConcreteType implements Trait.

fn as_any(&self) -> &(dyn Any + 'static)

Converts &Trait (where Trait: Downcast) to &Any. This is needed since Rust cannot generate &Any’s vtable from &Trait’s.

fn as_any_mut(&mut self) -> &mut (dyn Any + 'static)

Converts &mut Trait (where Trait: Downcast) to &Any. This is needed since Rust cannot generate &mut Any’s vtable from &mut Trait’s.

impl<T> DowncastSend for T
where T: Any + Send,

fn into_any_send(self: Box<T>) -> Box<dyn Any + Send>

Converts Box<Trait> (where Trait: DowncastSend) to Box<dyn Any + Send>, which can then be downcast into Box<ConcreteType> where ConcreteType implements Trait.

impl<T> DowncastSync for T
where T: Any + Send + Sync,

fn into_any_sync(self: Box<T>) -> Box<dyn Any + Sync + Send>

Converts Box<Trait> (where Trait: DowncastSync) to Box<dyn Any + Send + Sync>, which can then be downcast into Box<ConcreteType> where ConcreteType implements Trait.

fn into_any_arc(self: Arc<T>) -> Arc<dyn Any + Sync + Send>

Converts Arc<Trait> (where Trait: DowncastSync) to Arc<Any>, which can then be downcast into Arc<ConcreteType> where ConcreteType implements Trait.

impl<T> DynClone for T
where T: Clone,

fn __clone_box(&self, _: Private) -> *mut ()

impl<T> FmtForward for T

fn fmt_binary(self) -> FmtBinary<Self>
where Self: Binary,

Causes self to use its Binary implementation when Debug-formatted.

fn fmt_display(self) -> FmtDisplay<Self>
where Self: Display,

Causes self to use its Display implementation when Debug-formatted.

fn fmt_lower_exp(self) -> FmtLowerExp<Self>
where Self: LowerExp,

Causes self to use its LowerExp implementation when Debug-formatted.

fn fmt_lower_hex(self) -> FmtLowerHex<Self>
where Self: LowerHex,

Causes self to use its LowerHex implementation when Debug-formatted.

fn fmt_octal(self) -> FmtOctal<Self>
where Self: Octal,

Causes self to use its Octal implementation when Debug-formatted.

fn fmt_pointer(self) -> FmtPointer<Self>
where Self: Pointer,

Causes self to use its Pointer implementation when Debug-formatted.

fn fmt_upper_exp(self) -> FmtUpperExp<Self>
where Self: UpperExp,

Causes self to use its UpperExp implementation when Debug-formatted.

fn fmt_upper_hex(self) -> FmtUpperHex<Self>
where Self: UpperHex,

Causes self to use its UpperHex implementation when Debug-formatted.

fn fmt_list(self) -> FmtList<Self>
where &'a Self: for<'a> IntoIterator,

Formats each item in a sequence. Read more

impl<T> From<T> for T

fn from(t: T) -> T

Returns the argument unchanged.

impl<T> Instrument for T

fn instrument(self, span: Span) -> Instrumented<Self>

Instruments this type with the provided [Span], returning an Instrumented wrapper. Read more

fn in_current_span(self) -> Instrumented<Self>

Instruments this type with the current Span, returning an Instrumented wrapper. Read more

impl<T, U> Into for T
where U: From<T>,

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

impl<T> IntoEither for T

fn into_either(self, into_left: bool) -> Either<Self, Self>

Converts self into a Left variant of Either<Self, Self> if into_left is true. Converts self into a Right variant of Either<Self, Self> otherwise. Read more

fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
where F: FnOnce(&Self) -> bool,

Converts self into a Left variant of Either<Self, Self> if into_left(&self) returns true. Converts self into a Right variant of Either<Self, Self> otherwise. Read more

impl<T> Pipe for T
where T: ?Sized,

fn pipe<R>(self, func: impl FnOnce(Self) -> R) -> R
where Self: Sized,

Pipes by value. This is generally the method you want to use. Read more

fn pipe_ref<'a, R>(&'a self, func: impl FnOnce(&'a Self) -> R) -> R
where R: 'a,

Borrows self and passes that borrow into the pipe function. Read more

fn pipe_ref_mut<'a, R>(&'a mut self, func: impl FnOnce(&'a mut Self) -> R) -> R
where R: 'a,

Mutably borrows self and passes that borrow into the pipe function. Read more

fn pipe_borrow<'a, B, R>(&'a self, func: impl FnOnce(&'a B) -> R) -> R
where Self: Borrow, B: 'a + ?Sized, R: 'a,

Borrows self, then passes self.borrow() into the pipe function. Read more

fn pipe_borrow_mut<'a, B, R>( &'a mut self, func: impl FnOnce(&'a mut B) -> R, ) -> R
where Self: BorrowMut, B: 'a + ?Sized, R: 'a,

Mutably borrows self, then passes self.borrow_mut() into the pipe function. Read more

fn pipe_as_ref<'a, U, R>(&'a self, func: impl FnOnce(&'a U) -> R) -> R
where Self: AsRef, U: 'a + ?Sized, R: 'a,

Borrows self, then passes self.as_ref() into the pipe function.

fn pipe_as_mut<'a, U, R>(&'a mut self, func: impl FnOnce(&'a mut U) -> R) -> R
where Self: AsMut, U: 'a + ?Sized, R: 'a,

Mutably borrows self, then passes self.as_mut() into the pipe function.

fn pipe_deref<'a, T, R>(&'a self, func: impl FnOnce(&'a T) -> R) -> R
where Self: Deref<Target = T>, T: 'a + ?Sized, R: 'a,

Borrows self, then passes self.deref() into the pipe function.

fn pipe_deref_mut<'a, T, R>( &'a mut self, func: impl FnOnce(&'a mut T) -> R, ) -> R
where Self: DerefMut<Target = T> + Deref, T: 'a + ?Sized, R: 'a,

Mutably borrows self, then passes self.deref_mut() into the pipe function.

impl<T> Same for T

type Output = T

Should always be Self

impl<T> Serialize for T
where T: Serialize + ?Sized,

fn erased_serialize(&self, serializer: &mut dyn Serializer) -> Result<(), Error>

fn do_erased_serialize( &self, serializer: &mut dyn Serializer, ) -> Result<(), ErrorImpl>

impl<T> Tap for T

fn tap(self, func: impl FnOnce(&Self)) -> Self

Immutable access to a value. Read more

fn tap_mut(self, func: impl FnOnce(&mut Self)) -> Self

Mutable access to a value. Read more

fn tap_borrow(self, func: impl FnOnce(&B)) -> Self
where Self: Borrow, B: ?Sized,

Immutable access to the Borrow of a value. Read more

fn tap_borrow_mut(self, func: impl FnOnce(&mut B)) -> Self
where Self: BorrowMut, B: ?Sized,

Mutable access to the BorrowMut of a value. Read more

fn tap_ref<R>(self, func: impl FnOnce(&R)) -> Self
where Self: AsRef<R>, R: ?Sized,

Immutable access to the AsRef<R> view of a value. Read more

fn tap_ref_mut<R>(self, func: impl FnOnce(&mut R)) -> Self
where Self: AsMut<R>, R: ?Sized,

Mutable access to the AsMut<R> view of a value. Read more

fn tap_deref<T>(self, func: impl FnOnce(&T)) -> Self
where Self: Deref<Target = T>, T: ?Sized,

Immutable access to the Deref::Target of a value. Read more

fn tap_deref_mut<T>(self, func: impl FnOnce(&mut T)) -> Self
where Self: DerefMut<Target = T> + Deref, T: ?Sized,

Mutable access to the Deref::Target of a value. Read more

fn tap_dbg(self, func: impl FnOnce(&Self)) -> Self

Calls .tap() only in debug builds, and is erased in release builds.

fn tap_mut_dbg(self, func: impl FnOnce(&mut Self)) -> Self

Calls .tap_mut() only in debug builds, and is erased in release builds.

fn tap_borrow_dbg(self, func: impl FnOnce(&B)) -> Self
where Self: Borrow, B: ?Sized,

Calls .tap_borrow() only in debug builds, and is erased in release builds.

fn tap_borrow_mut_dbg(self, func: impl FnOnce(&mut B)) -> Self
where Self: BorrowMut, B: ?Sized,

Calls .tap_borrow_mut() only in debug builds, and is erased in release builds.

fn tap_ref_dbg<R>(self, func: impl FnOnce(&R)) -> Self
where Self: AsRef<R>, R: ?Sized,

Calls .tap_ref() only in debug builds, and is erased in release builds.

fn tap_ref_mut_dbg<R>(self, func: impl FnOnce(&mut R)) -> Self
where Self: AsMut<R>, R: ?Sized,

Calls .tap_ref_mut() only in debug builds, and is erased in release builds.

fn tap_deref_dbg<T>(self, func: impl FnOnce(&T)) -> Self
where Self: Deref<Target = T>, T: ?Sized,

Calls .tap_deref() only in debug builds, and is erased in release builds.

fn tap_deref_mut_dbg<T>(self, func: impl FnOnce(&mut T)) -> Self
where Self: DerefMut<Target = T> + Deref, T: ?Sized,

Calls .tap_deref_mut() only in debug builds, and is erased in release builds.

impl<T> ToOwned for T
where T: Clone,

type Owned = T

The resulting type after obtaining ownership.

fn to_owned(&self) -> T

Creates owned data from borrowed data, usually by cloning. Read more

fn clone_into(&self, target: &mut T)

Uses borrowed data to replace owned data, usually by cloning. Read more

impl<T> TryConv for T

fn try_conv<T>(self) -> Result<T, Self::Error>
where Self: TryInto<T>,

Attempts to convert self into T using TryInto<T>. Read more

impl<T, U> TryFrom for T
where U: Into<T>,

type Error = Infallible

The type returned in the event of a conversion error.

fn try_from(value: U) -> Result<T, <T as TryFrom>::Error>

Performs the conversion.

impl<T, U> TryInto for T
where U: TryFrom<T>,

type Error = >::Error

The type returned in the event of a conversion error.

fn try_into(self) -> Result<U, >::Error>

Performs the conversion.

impl<V, T> VZip<V> for T
where V: MultiLane<T>,

fn vzip(self) -> V

impl<T> WithSubscriber for T

fn with_subscriber<S>(self, subscriber: S) -> WithDispatch<Self>
where S: Into<Dispatch>,

Attaches the provided Subscriber to this type, returning a [WithDispatch] wrapper. Read more

fn with_current_subscriber(self) -> WithDispatch<Self>

Attaches the current default Subscriber to this type, returning a [WithDispatch] wrapper. Read more

impl<T> DeserializeOwned for T
where T: for<'de> Deserialize<'de>,

impl<T> ErasedDestructor for T
where T: 'static,