tor_hsclient

Enum FailedAttemptError

Source 
#[non_exhaustive]
pub enum FailedAttemptError {
    UnusableIntro {
        error: InvalidTarget,
        intro_index: IntroPtIndex,
    },
    RendezvousCircuitObtain {
        error: Error,
    },
    RendezvousEstablishTimeout {
        rend_pt: Redacted<RelayIds>,
    },
    RendezvousEstablish {
        error: Error,
        rend_pt: Redacted<RelayIds>,
    },
    IntroductionCircuitObtain {
        error: Error,
        intro_index: IntroPtIndex,
    },
    IntroductionExchange {
        error: Error,
        intro_index: IntroPtIndex,
    },
    IntroductionFailed {
        status: IntroduceAckStatus,
        intro_index: IntroPtIndex,
    },
    IntroductionTimeout {
        intro_index: IntroPtIndex,
    },
    RendezvousCompletionTimeout {
        intro_index: IntroPtIndex,
        rend_pt: Redacted<RelayIds>,
    },
    RendezvousCompletionCircuitError {
        error: Error,
        intro_index: IntroPtIndex,
        rend_pt: Redacted<RelayIds>,
    },
    RendezvousCompletionHandshake {
        error: Error,
        intro_index: IntroPtIndex,
        rend_pt: Redacted<RelayIds>,
    },
    Bug(Bug),
}
Expand description

Error that occurred making one attempt to connect to a hidden service using an IP and RP

Variants (Non-exhaustive)§

This enum is marked as non-exhaustive
Non-exhaustive enums could have additional variants added in future. Therefore, when matching against variants of non-exhaustive enums, an extra wildcard arm must be added to account for any future variants.
§

UnusableIntro

Introduction point unusable because it couldn’t be used as a circuit target

Fields

§error: InvalidTarget

Why it’s not use able

§intro_index: IntroPtIndex

The index of the IPT in the list of IPTs in the descriptor

§

RendezvousCircuitObtain

Failed to obtain any circuit to use as a rendezvous circuit

Fields

§error: Error

Why it’s not use able

§

RendezvousEstablishTimeout

Creating a rendezvous circuit and rendezvous point took too long

Fields

§rend_pt: Redacted<RelayIds>

Which relay did we choose for rendezvous point

§

RendezvousEstablish

Failed to establish rendezvous point

Fields

§error: Error

What happened

§rend_pt: Redacted<RelayIds>

Which relay did we choose for rendezvous point

§

IntroductionCircuitObtain

Failed to obtain circuit to introduction point

Fields

§error: Error

What happened

§intro_index: IntroPtIndex

The index of the IPT in the list of IPTs in the descriptor

§

IntroductionExchange

Introduction exchange (with the introduction point) failed

Fields

§error: Error

What happened

§intro_index: IntroPtIndex

The index of the IPT in the list of IPTs in the descriptor

§

IntroductionFailed

Introduction point reported error in its INTRODUCE_ACK

Fields

§status: IntroduceAckStatus

The status code provided by the introduction point

§intro_index: IntroPtIndex

The index of the IPT in the list of IPTs in the descriptor

§

IntroductionTimeout

Communication with introduction point {intro_index} took too long

This might mean it took too long to establish a circuit to the IPT, or that the INTRODUCE exchange took too long.

Fields

§intro_index: IntroPtIndex

The index of the IPT in the list of IPTs in the descriptor

§

RendezvousCompletionTimeout

It took too long for the rendezvous to be completed

This might be the fault of almost anyone. All we know is that we got a successful INTRODUCE_ACK but the RENDEZVOUS2 never arrived.

Fields

§intro_index: IntroPtIndex

The index of the IPT in the list of IPTs in the descriptor

§rend_pt: Redacted<RelayIds>

Which relay did we choose for rendezvous point

§

RendezvousCompletionCircuitError

Error on rendezvous circuit when expecting rendezvous completion (RENDEZVOUS2)

Fields

§error: Error

What happened

§intro_index: IntroPtIndex

The index of the IPT in the list of IPTs in the descriptor

§rend_pt: Redacted<RelayIds>

Which relay did we choose for rendezvous point

§

RendezvousCompletionHandshake

Error processing rendezvous completion (RENDEZVOUS2)

This is might be the fault of the hidden service or the rendezvous point.

Fields

§error: Error

What happened

§intro_index: IntroPtIndex

The index of the IPT in the list of IPTs in the descriptor

§rend_pt: Redacted<RelayIds>

Which relay did we choose for rendezvous point

§

Bug(Bug)

Internal error

Trait Implementations§

Source§

impl AsRef<dyn Error> for FailedAttemptError

Source§

fn as_ref(&self) -> &(dyn Error + 'static)

Converts this type into a shared reference of the (usually inferred) input type.
Source§

impl Clone for FailedAttemptError

Source§

fn clone(&self) -> FailedAttemptError

Returns a copy of the value. Read more
1.0.0 · Source§

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source. Read more
Source§

impl Debug for FailedAttemptError

Source§

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter. Read more
Source§

impl Display for FailedAttemptError

Source§

fn fmt(&self, __formatter: &mut Formatter<'_>) -> Result

Formats the value using the given formatter. Read more
Source§

impl Error for FailedAttemptError

Source§

fn source(&self) -> Option<&(dyn Error + 'static)>

Returns the lower-level source of this error, if any. Read more
1.0.0 · Source§

fn description(&self) -> &str

👎Deprecated since 1.42.0: use the Display impl or to_string()
Read more
1.0.0 · Source§

fn cause(&self) -> Option<&dyn Error>

👎Deprecated since 1.33.0: replaced by Error::source, which can support downcasting
Source§

fn provide<'a>(&'a self, request: &mut Request<'a>)

🔬This is a nightly-only experimental API. (error_generic_member_access)
Provides type-based access to context intended for error reports. Read more
Source§

impl From<Bug> for FailedAttemptError

Source§

fn from(source: Bug) -> Self

Converts to this type from the input type.
Source§

impl HasKind for FailedAttemptError

Source§

fn kind(&self) -> ErrorKind

Return the kind of this error.
Source§

impl HasRetryTime for FailedAttemptError

When an attempt like this should be retried.

For error variants with an introduction point index (FailedAttemptError::intro_index returns Some) that’s when we might retry with that introduction point.

For error variants with a rendezvous point, that’s when we might retry with that rendezvous point.

For variants with both, we don’t know which of the introduction point or rendezvous point is implicated. Retrying earlier with one different relay out of the two relays would be reasonable, as would delaying retrying with either of the same relays.

Source§

fn retry_time(&self) -> RetryTime

Return the time when the operation that gave this error can be retried. Read more
Source§

fn abs_retry_time<F>(&self, now: Instant, choose_delay: F) -> AbsRetryTime
where F: FnOnce() -> Duration, Self: Sized,

Return an absolute retry when the operation that gave this error can be retried. Read more
Source§

impl IntoDiscriminant for FailedAttemptError

Source§

type Discriminant = FailedAttemptErrorDiscriminants

Enum listing the same variants as this enum but without any data fields
Source§

fn discriminant(&self) -> Self::Discriminant

Auto Trait Implementations§

Blanket Implementations§

Source§

impl<T> Any for T
where T: 'static + ?Sized,

Source§

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more
§

impl<'a, T, E> AsTaggedExplicit<'a, E> for T
where T: 'a,

§

fn explicit(self, class: Class, tag: u32) -> TaggedParser<'a, Explicit, Self, E>

§

impl<'a, T, E> AsTaggedImplicit<'a, E> for T
where T: 'a,

§

fn implicit( self, class: Class, constructed: bool, tag: u32, ) -> TaggedParser<'a, Implicit, Self, E>

Source§

impl<T> Borrow<T> for T
where T: ?Sized,

Source§

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more
Source§

impl<T> BorrowMut<T> for T
where T: ?Sized,

Source§

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more
Source§

impl<T> CloneToUninit for T
where T: Clone,

Source§

unsafe fn clone_to_uninit(&self, dest: *mut u8)

🔬This is a nightly-only experimental API. (clone_to_uninit)
Performs copy-assignment from self to dest. Read more
§

impl<T> Conv for T

§

fn conv<T>(self) -> T
where Self: Into<T>,

Converts self into T using Into<T>. Read more
§

impl<T> Downcast for T
where T: Any,

§

fn into_any(self: Box<T>) -> Box<dyn Any>

Converts Box<dyn Trait> (where Trait: Downcast) to Box<dyn Any>, which can then be downcast into Box<dyn ConcreteType> where ConcreteType implements Trait.
§

fn into_any_rc(self: Rc<T>) -> Rc<dyn Any>

Converts Rc<Trait> (where Trait: Downcast) to Rc<Any>, which can then be further downcast into Rc<ConcreteType> where ConcreteType implements Trait.
§

fn as_any(&self) -> &(dyn Any + 'static)

Converts &Trait (where Trait: Downcast) to &Any. This is needed since Rust cannot generate &Any’s vtable from &Trait’s.
§

fn as_any_mut(&mut self) -> &mut (dyn Any + 'static)

Converts &mut Trait (where Trait: Downcast) to &Any. This is needed since Rust cannot generate &mut Any’s vtable from &mut Trait’s.
§

impl<T> DowncastSend for T
where T: Any + Send,

§

fn into_any_send(self: Box<T>) -> Box<dyn Any + Send>

Converts Box<Trait> (where Trait: DowncastSend) to Box<dyn Any + Send>, which can then be downcast into Box<ConcreteType> where ConcreteType implements Trait.
§

impl<T> DowncastSync for T
where T: Any + Send + Sync,

§

fn into_any_sync(self: Box<T>) -> Box<dyn Any + Sync + Send>

Converts Box<Trait> (where Trait: DowncastSync) to Box<dyn Any + Send + Sync>, which can then be downcast into Box<ConcreteType> where ConcreteType implements Trait.
§

fn into_any_arc(self: Arc<T>) -> Arc<dyn Any + Sync + Send>

Converts Arc<Trait> (where Trait: DowncastSync) to Arc<Any>, which can then be downcast into Arc<ConcreteType> where ConcreteType implements Trait.
Source§

impl<T> DynClone for T
where T: Clone,

Source§

fn __clone_box(&self, _: Private) -> *mut ()

Source§

impl<E> ErrorReport for E
where E: Error + 'static,

Source§

fn report(&self) -> Report<ReportHelper<'_>>

Return an object that displays the error and its causes
§

impl<T> FmtForward for T

§

fn fmt_binary(self) -> FmtBinary<Self>
where Self: Binary,

Causes self to use its Binary implementation when Debug-formatted.
§

fn fmt_display(self) -> FmtDisplay<Self>
where Self: Display,

Causes self to use its Display implementation when Debug-formatted.
§

fn fmt_lower_exp(self) -> FmtLowerExp<Self>
where Self: LowerExp,

Causes self to use its LowerExp implementation when Debug-formatted.
§

fn fmt_lower_hex(self) -> FmtLowerHex<Self>
where Self: LowerHex,

Causes self to use its LowerHex implementation when Debug-formatted.
§

fn fmt_octal(self) -> FmtOctal<Self>
where Self: Octal,

Causes self to use its Octal implementation when Debug-formatted.
§

fn fmt_pointer(self) -> FmtPointer<Self>
where Self: Pointer,

Causes self to use its Pointer implementation when Debug-formatted.
§

fn fmt_upper_exp(self) -> FmtUpperExp<Self>
where Self: UpperExp,

Causes self to use its UpperExp implementation when Debug-formatted.
§

fn fmt_upper_hex(self) -> FmtUpperHex<Self>
where Self: UpperHex,

Causes self to use its UpperHex implementation when Debug-formatted.
§

fn fmt_list(self) -> FmtList<Self>
where &'a Self: for<'a> IntoIterator,

Formats each item in a sequence. Read more
Source§

impl<T> From<T> for T

Source§

fn from(t: T) -> T

Returns the argument unchanged.

§

impl<T> Instrument for T

§

fn instrument(self, span: Span) -> Instrumented<Self>

Instruments this type with the provided [Span], returning an Instrumented wrapper. Read more
§

fn in_current_span(self) -> Instrumented<Self>

Instruments this type with the current Span, returning an Instrumented wrapper. Read more
Source§

impl<T, U> Into<U> for T
where U: From<T>,

Source§

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

Source§

impl<T> IntoEither for T

Source§

fn into_either(self, into_left: bool) -> Either<Self, Self>

Converts self into a Left variant of Either<Self, Self> if into_left is true. Converts self into a Right variant of Either<Self, Self> otherwise. Read more
Source§

fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
where F: FnOnce(&Self) -> bool,

Converts self into a Left variant of Either<Self, Self> if into_left(&self) returns true. Converts self into a Right variant of Either<Self, Self> otherwise. Read more
§

impl<T> Pipe for T
where T: ?Sized,

§

fn pipe<R>(self, func: impl FnOnce(Self) -> R) -> R
where Self: Sized,

Pipes by value. This is generally the method you want to use. Read more
§

fn pipe_ref<'a, R>(&'a self, func: impl FnOnce(&'a Self) -> R) -> R
where R: 'a,

Borrows self and passes that borrow into the pipe function. Read more
§

fn pipe_ref_mut<'a, R>(&'a mut self, func: impl FnOnce(&'a mut Self) -> R) -> R
where R: 'a,

Mutably borrows self and passes that borrow into the pipe function. Read more
§

fn pipe_borrow<'a, B, R>(&'a self, func: impl FnOnce(&'a B) -> R) -> R
where Self: Borrow<B>, B: 'a + ?Sized, R: 'a,

Borrows self, then passes self.borrow() into the pipe function. Read more
§

fn pipe_borrow_mut<'a, B, R>( &'a mut self, func: impl FnOnce(&'a mut B) -> R, ) -> R
where Self: BorrowMut<B>, B: 'a + ?Sized, R: 'a,

Mutably borrows self, then passes self.borrow_mut() into the pipe function. Read more
§

fn pipe_as_ref<'a, U, R>(&'a self, func: impl FnOnce(&'a U) -> R) -> R
where Self: AsRef<U>, U: 'a + ?Sized, R: 'a,

Borrows self, then passes self.as_ref() into the pipe function.
§

fn pipe_as_mut<'a, U, R>(&'a mut self, func: impl FnOnce(&'a mut U) -> R) -> R
where Self: AsMut<U>, U: 'a + ?Sized, R: 'a,

Mutably borrows self, then passes self.as_mut() into the pipe function.
§

fn pipe_deref<'a, T, R>(&'a self, func: impl FnOnce(&'a T) -> R) -> R
where Self: Deref<Target = T>, T: 'a + ?Sized, R: 'a,

Borrows self, then passes self.deref() into the pipe function.
§

fn pipe_deref_mut<'a, T, R>( &'a mut self, func: impl FnOnce(&'a mut T) -> R, ) -> R
where Self: DerefMut<Target = T> + Deref, T: 'a + ?Sized, R: 'a,

Mutably borrows self, then passes self.deref_mut() into the pipe function.
Source§

impl<T> Same for T

Source§

type Output = T

Should always be Self
§

impl<T> Tap for T

§

fn tap(self, func: impl FnOnce(&Self)) -> Self

Immutable access to a value. Read more
§

fn tap_mut(self, func: impl FnOnce(&mut Self)) -> Self

Mutable access to a value. Read more
§

fn tap_borrow<B>(self, func: impl FnOnce(&B)) -> Self
where Self: Borrow<B>, B: ?Sized,

Immutable access to the Borrow<B> of a value. Read more
§

fn tap_borrow_mut<B>(self, func: impl FnOnce(&mut B)) -> Self
where Self: BorrowMut<B>, B: ?Sized,

Mutable access to the BorrowMut<B> of a value. Read more
§

fn tap_ref<R>(self, func: impl FnOnce(&R)) -> Self
where Self: AsRef<R>, R: ?Sized,

Immutable access to the AsRef<R> view of a value. Read more
§

fn tap_ref_mut<R>(self, func: impl FnOnce(&mut R)) -> Self
where Self: AsMut<R>, R: ?Sized,

Mutable access to the AsMut<R> view of a value. Read more
§

fn tap_deref<T>(self, func: impl FnOnce(&T)) -> Self
where Self: Deref<Target = T>, T: ?Sized,

Immutable access to the Deref::Target of a value. Read more
§

fn tap_deref_mut<T>(self, func: impl FnOnce(&mut T)) -> Self
where Self: DerefMut<Target = T> + Deref, T: ?Sized,

Mutable access to the Deref::Target of a value. Read more
§

fn tap_dbg(self, func: impl FnOnce(&Self)) -> Self

Calls .tap() only in debug builds, and is erased in release builds.
§

fn tap_mut_dbg(self, func: impl FnOnce(&mut Self)) -> Self

Calls .tap_mut() only in debug builds, and is erased in release builds.
§

fn tap_borrow_dbg<B>(self, func: impl FnOnce(&B)) -> Self
where Self: Borrow<B>, B: ?Sized,

Calls .tap_borrow() only in debug builds, and is erased in release builds.
§

fn tap_borrow_mut_dbg<B>(self, func: impl FnOnce(&mut B)) -> Self
where Self: BorrowMut<B>, B: ?Sized,

Calls .tap_borrow_mut() only in debug builds, and is erased in release builds.
§

fn tap_ref_dbg<R>(self, func: impl FnOnce(&R)) -> Self
where Self: AsRef<R>, R: ?Sized,

Calls .tap_ref() only in debug builds, and is erased in release builds.
§

fn tap_ref_mut_dbg<R>(self, func: impl FnOnce(&mut R)) -> Self
where Self: AsMut<R>, R: ?Sized,

Calls .tap_ref_mut() only in debug builds, and is erased in release builds.
§

fn tap_deref_dbg<T>(self, func: impl FnOnce(&T)) -> Self
where Self: Deref<Target = T>, T: ?Sized,

Calls .tap_deref() only in debug builds, and is erased in release builds.
§

fn tap_deref_mut_dbg<T>(self, func: impl FnOnce(&mut T)) -> Self
where Self: DerefMut<Target = T> + Deref, T: ?Sized,

Calls .tap_deref_mut() only in debug builds, and is erased in release builds.
Source§

impl<T> ToOwned for T
where T: Clone,

Source§

type Owned = T

The resulting type after obtaining ownership.
Source§

fn to_owned(&self) -> T

Creates owned data from borrowed data, usually by cloning. Read more
Source§

fn clone_into(&self, target: &mut T)

Uses borrowed data to replace owned data, usually by cloning. Read more
Source§

impl<T> ToString for T
where T: Display + ?Sized,

Source§

fn to_string(&self) -> String

Converts the given value to a String. Read more
§

impl<T> TryConv for T

§

fn try_conv<T>(self) -> Result<T, Self::Error>
where Self: TryInto<T>,

Attempts to convert self into T using TryInto<T>. Read more
Source§

impl<T, U> TryFrom<U> for T
where U: Into<T>,

Source§

type Error = Infallible

The type returned in the event of a conversion error.
Source§

fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>

Performs the conversion.
Source§

impl<T, U> TryInto<U> for T
where U: TryFrom<T>,

Source§

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.
Source§

fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

Performs the conversion.
Source§

impl<T> TryIntoSlug for T
where T: ToString + ?Sized,

Source§

fn try_into_slug(&self) -> Result<Slug, BadSlug>

Convert self into a Slug, if it has the right syntax
§

impl<V, T> VZip<V> for T
where V: MultiLane<T>,

§

fn vzip(self) -> V

§

impl<T> WithSubscriber for T

§

fn with_subscriber<S>(self, subscriber: S) -> WithDispatch<Self>
where S: Into<Dispatch>,

Attaches the provided Subscriber to this type, returning a [WithDispatch] wrapper. Read more
§

fn with_current_subscriber(self) -> WithDispatch<Self>

Attaches the current default Subscriber to this type, returning a [WithDispatch] wrapper. Read more
§

impl<T> ErasedDestructor for T
where T: 'static,

§

impl<T> MaybeSendSync for T